Intel Extensible Firmware Interface, Specification

Page: 258 / 494

Extensible Firmware Interface Specification
240 12/12/00 Version 1.02
StationIp
The device’s current IP address. This field is initialized to a zero
address by
Start()
. This field is set when the
Dhcp()
function completes successfully. This field can also be
set by the
SetStationIp()
function.
SubnetMask
The device’s current subnet mask. This field is initialized to a
zero address by the
Start()
function. This field is set when
the
Dhcp()
function completes successfully. This field can also
be set by the
SetStationIp()
function.
DhcpDiscover
Cached DHCP Discover packet. This field is zero-filled by the
Start()
function, and is set when the
Dhcp()
function
completes successfully. The contents of this field can replaced
by the
SetPackets()
function.
DhcpAck
Cached DHCP Ack packet. This field is zero-filled by the
Start()
function, and is set when the
Dhcp()
function
completes successfully. The contents of this field can be
replaced by the
SetPackets()
function.
ProxyOffer
Cached Proxy Offer packet. This field is zero-filled by the
Start()
function, and is set when the
Dhcp()
function
completes successfully. The contents of this field can be
replaced by the
SetPackets()
function.
PxeDiscover
Cached PXE Discover packet. This field is zero-filled by the
Start()
function, and is set when the
Discover()
function
completes successfully. The contents of this field can be
replaced by the
SetPackets()
function.
PxeReply
Cached PXE Reply packet. This field is zero-filled by the
Start()
function, and is set when the
Discover()
function
completes successfully. The contents of this field can be replaced
by the
SetPackets()
function.
PxeBisReply
Cached PXE BIS Reply packet. This field is zero-filled by the
Start()
function, and is set when the
Discover()
function
completes successfully. This field can be replaced by the
SetPackets()
function.
IpFilter
The current IP receive filter settings. The receive filter is
disabled and the number of IP receive filters is set to zero by the
Start()
function, and is set by the
SetIpFilter()
function.
ArpCacheEntries
The number of valid entries in the ARP cache. This field is reset
to zero by the
Start()
function.
ArpCache
Array of cached ARP entries.