Intel Extensible Firmware Interface Specification Download Page 300

Page: 300 / 494

Extensible Firmware Interface Specification

282

12/12/00

Version 1.02

15.1.1 EFI_SIMPLE_NETWO RK.Start()

Summary

Changes the state of a network interface from “stopped” “started”.

Prototype

EFI_STATUS

(EFIAPI *EFI_SIMPLE_NETWORK_START) (

IN EFI_SIMPLE_NETWORK

*This

);

Parameters

This

A pointer to the

EFI_SIMPLE_NETWORK

instance.

Description

This function starts a network interface. If the network interface was successfully started, then

EFI_SUCCESS

will be returned.

Status Codes Returned

EFI_SUCCESS

The network interface was started.

EFI_ALREADY_STARTED

The network interface is already in the started state.

EFI_INVALID_PARAMETER

One or more of the parameters has an unsupported value.

EFI_DEVICE_ERROR

The command could not be sent to the network interface.

EFI_UNSUPPORTED

This function is not supported by the network interface.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands