manualshive.com logo in svg

Intel Extensible Firmware Interface, Specification

Share
Download
Intel Extensible Firmware Interface Specification Download Page 315

SIMPLE_NETWORK Protocol

Version 1.02

12/12/00

297

Description

This function gets the current interrupt and recycled transmit buffer status from the network
interface.  The interrupt status is returned as a bit mask in 

InterruptStatus

.  If

InterruptStatus

 is 

NULL

, the interrupt status will not be read.  If 

TxBuf

 is not 

NULL

, a

recycled transmit buffer address will be retrieved.  If a recycled transmit buffer address is returned
in 

TxBuf

, then the buffer has been successfully transmitted, and the status for that buffer is

cleared.  If the status of the network interface is successfully collected, 

EFI_SUCCESS

 will be

returned.  If the driver has not been initialized, 

EFI_DEVICE_ERROR

 will be returned.

Status Codes Returned

EFI_SUCCESS

The status of the network interface was retrieved.

EFI_NOT_STARTED

The network interface has not been started.

EFI_INVALID_PARAMETER

One or more of the parameters has an unsupported value.

EFI_DEVICE_ERROR

The command could not be sent to the network interface.

EFI_UNSUPPORTED

This function is not supported by the network interface.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands