Intel Extensible Firmware Interface Specification Download Page 212

Page: 212 / 494

Extensible Firmware Interface Specification

194

12/12/00

Version 1.02

Status Codes Returned

EFI_SUCCESS

The file was opened.

EFI_NOT_FOUND

The specified file could not be found on the device.

EFI_NO_MEDIA

The device has no medium.

EFI_MEDIA_CHANGED

The device has a different medium in it or the medium is no
longer supported.

EFI_DEVICE_ERROR

The device reported an error.

EFI_VOLUME_CORRUPTED

The file system structures are corrupted.

EFI_WRITE_PROTECTED

An attempt was made to create a file, or open a file for write
when the media is write protected.

EFI_ACCESS_DENIED

The service denied access to the file.

EFI_OUT_OF_RESOURCES

Not enough resources were available to open the file.

EFI_VOLUME_FULL

The volume is full.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands