Intel Extensible Firmware Interface Specification Download Page 290

Page: 290 / 494

Extensible Firmware Interface Specification

272

12/12/00

Version 1.02

NewPxeBisReplyReceived

If not

NULL

, a pointer to a value that specifies whether to

replace the current value of

PxeBisReplyReceived

field.

NULL

, this parameter is ignored.

NewDhcpDiscover

Pointer to the new cached DHCP Discover packet.

NewDhcpAck

Pointer to the new cached DHCP Ack packet.

NewProxyOffer

Pointer to the new cached Proxy Offer packet.

NewPxeDiscover

Pointer to the new cached PXE Discover packet.

NewPxeReply

Pointer to the new cached PXE Reply packet.

NewPxeBisReply

Pointer to the new cached PXE BIS Reply packet.

Description

The pointers to the new packets are used to update the contents of the cached packets in the

EFI_PXE_BASE_CODE_MODE

structure.

Status Codes Returned

EFI_SUCCESS

The cached packet contents were updated.

EFI_INVALID_PARAMETER

One of the parameters is not valid.

EFI_NOT_STARTED

The PXE Base Code Protocol is not in the started state.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands