Intel Extensible Firmware Interface Specification Download Page 122

Page: 122 / 494

Extensible Firmware Interface Specification

104

12/12/00

Version 1.02

If an add, modify, or remove operation is completed, then EFI_SUCCESS is returned.

Note: If there is not enough memory to perform an add operation, then

EFI_OUT_OF_RESOURCES

is returned.

Status Codes Returned

EFI_SUCCESS

The (

Guid

Table

) pair was added, updated, or removed.

EFI_INVALID_PARAMETER

Guid

is not valid.

EFI_NOT_FOUND

An attempt was made to delete a non-existent entry.

EFI_OUT_OF_RESOURCES

There is not enough memory available to complete the operation.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands