Intel Extensible Firmware Interface Specification Download Page 111

Page: 111 / 494

Services

Version 1.02

12/12/00

A virtual address map may only be applied one time. Once the runtime system is in virtual mode,
calls to this function return

EFI_UNSUPPORTED

Status Codes Returned

EFI_SUCCESS

The virtual address map has been applied.

EFI_UNSUPPORTED

EFI firmware is not at runtime, or the EFI firmware is already in
virtual address mapped mode.

EFI_INVALID_PARAMETER

DescriptorSize

DescriptorVersion

invalid.

EFI_NO_MAPPING

A virtual address was not supplied for a range in the memory
map that requires a mapping.

EFI_NOT_FOUND

A virtual address was supplied for an address that is not found
in the memory map.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands