Loading Saved Session
This section guides you through loading the Intel IoT Gateway session.
1. Click Intel IoT Gateway under Saved Sessions. See number 1 in the following
figure.
2. Click Load to display the Intel IoT Gateway settings. See number 2 in the figure.
3. Change the Serial line to /dev/ttyUSB0 and then click Save. See numbers 3
and 4 in the figure.
4. Click Open to open a PuTTY Virtual Terminal session. See number 5 in the figure.
Figure 60.
Update Session with Correct tty Port
A PuTTY Virtual Terminal session displays as a black screen with a cursor in the
upper left corner.
Installing and Configuring PuTTY—Intel IoT Gateway Development Kit DK200 Series
Intel
®
IoT Gateway Development Kit DK200 Series
April 2015
Getting Started Guide
Order No.: 330295-004
81
