14. Click Next. The License Agreement displays. Review it, and then click I
ACCEPT if you agree to the terms of the agreement.
15. On the page Confirm and Install, click Install.
Figure 19.
Confirm and Install
Note: The download and install might take several hours depending on the speed
of your Internet connection.
When the installation is complete, the top of the screen displays Installed
Content and the Next button is again available.
16. Click Next. A thank you message displays with a link to a readme file.
Recommended: Leave the default check next to the readme file.
17. Click Finish to exit the Installer window. The readme file opens in a browser and
the installation application closes.
If you encounter installation issues, provide your Intel support contact with the
following files from the directory:
$HOME/WindRiver/
•
setup.log
•
setup_install_failure.log
Intel IoT Gateway Development Kit DK200 Series —Install Linux Packages and Wind River Linux
Host Tools on the Host System
Intel
®
IoT Gateway Development Kit DK200 Series
Getting Started Guide
April 2015
36
Order No.: 330295-004
