Intel DB75EN Page 16 Specification Download

Page: 16 / 96

Intel Desktop Board DB75EN Technical Product Specification

1.2

Online Support

To find information about…

Visit this World Wide Web site:

Intel Desktop Board DB75EN

http://www.intel.com/products/motherboard/index.htm

Desktop Board Support

http://www.intel.com/p/en_US/support?iid=hdr+support

Available configurations for Intel
Desktop Board DB75EN

http://ark.intel.com

Supported processors

http://processormatch.intel.com

Chipset information

http://www.intel.com/products/desktop/chipsets/index.htm

BIOS and driver updates

http://downloadcenter.intel.com

Tested memory

http://www.intel.com/support/motherboards/desktop/sb/CS-
025414.htm

Integration information

http://www.intel.com/support/go/buildit

1.3

Processor

The board supports 3

generation Intel Core processor family and 2

generation Intel

Core processor family processors.
Other processors may be supported in the future. This board supports processors with

a maximum wattage of 95 W Thermal Design Power (TDP). The processors listed

above are only supported when falling within the wattage requirements of Intel

Desktop Board DB75EN. See the Intel web site listed below for the most up-to-date

list of supported processors.

For information about…

Refer to:

Supported processors

http://processormatch.intel.com

CAUTION

Use only the processors listed on the web site above. Use of unsupported processors

can damage the board, the processor, and the power supply.

NOTE

This board has specific requirements for providing power to the processor. Refer to

Section 2.6.1 on page 58 for information on power supply requirements for this board.

Summary of Contents for DB75EN

































































































Search results

Summary of Contents for DB75EN

Reviews:

Related manuals for DB75EN

Brands by name

Popular brands

Intel DB75EN, Specification

Search results

Summary of Contents for DB75EN

Reviews:

Related manuals for DB75EN

Brands by name

Popular brands