Intel® Server D50TNP Family Integration and Service Guide
56
Figure 53. Securing the Memory Cooler to the Server Board
9.
Tighten the fastener screws in the liquid-cooling loop to secure the memory cooler to the server board.
2.6
Module Installation
For installation procedures associated with all other system options and accessories, refer to the System
Options/Accessory Kit Installation section. If no other installations are required, the module must be
installed in the chassis using the following steps.
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
Figure 54. Installing a Module
1.
Ensure the lever in front of the module is lowered. If not, press the green latch inward and lower the lever
(see Letter A).
2.
Align the module to its corresponding bay and push it into the chassis until the key pins in the lever are
inside the chassis inner wall key hole.
3.
Raise the lever to secure the module (see Letter B).
1U module shown