Intel® Server D50TNP Family Integration and Service Guide
28
Figure 9. 1U Heat Sinks Installed in Module
2.3.1
Assembly and Installation for Standard Air-Cooled Heat Sinks
Components Required:
•
3
rd
Gen Intel® Xeon® Scalable processors
•
Processor carrier clips
•
1U processor heat sinks (front and back) or 2U processor heat sinks (front and back)
•
Processor tray as shipped by Intel
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
T-30 Torx* screwdriver
•
ESD Gloves
Note:
The installation figures in this section only display the 1U front heat sink. However, the processor
installation procedure is the same, regardless of the size of the heat sink.
A processor heat sink module (PHM) assembly and processor socket assembly (or
“loading mechanism”) are
necessary to install a processor onto the server board.
identifies each component associated with
the PHM and processor socket assemblies.