Intel® Server D50TNP Family Integration and Service Guide
108
Figure 136. Removing the Internal Chassis Rail
1.
Locate the internal rails in the upper part of the inner wall, both sides of the chassis.
2.
Release the rail latch (see Letter A).
3.
Slide the rail towards the front of the chassis to remove it (see Letter B).
Do not reinstall the internal chassis rails if the chassis is used only for the Intel® Storage Module. For any
other type of module installation, the internal chassis rails need to be reinstalled. Follow the instructions
below to reinstall the internal chassis rails.
Figure 137. Installing the Internal Chassis Rail
4.
Place the new rail inside the chassis, aligning the keying pins of the rail with the chassis inner wall.
5.
Slide the rail into the chassis inner wall towards the back of the chassis until it locks into place.