Intel® Server D50TNP Family Integration and Service Guide
131
Figure 177. Processor Carrier Clip Removal from Processor Cold Plate
9.
Return the lever to the original position (see Letter C).
10.
Detach the processor carrier clip from the processor cold plate.
•
Unlatch the hook on each corner of the processor carrier clip and lift it from the processor cold plate
(see Letter D).
To properly reassemble the new processor and processor carrier clip and install them onto the server board,
the following procedures must be followed in the order specified. These instructions assume that the
processor cold plate has the necessary Thermal Interface Material (TIM) (DOW
CORNING™ TC
-5622) already
applied to the bottom of the cold plate.
Caution:
Full ESD precautions should be followed to perform reassembly of the PHM and reinstallation of
the PHM to the server board. At no time should the processor itself be handled.
New processor, processor carrier clip, and processor socket all have a Pin 1 indicator. Pin 1 indicator
alignment between all these components is required throughout the assembly process.
Figure 178. Installing Processor Carrier clip onto Processor
–
Part 1
11.
With the processor still in its tray, place the processor carrier clip over the processor.
