Intel® Server D50TNP Family Integration and Service Guide
60
Figure 59. Securing the Back of the Rail
5.
Extend and align the rear guides with their slots in the back of the rack (see Letter D).
6.
Insert the rail guides into their respective rack slots while pressing the clip (see Letter E).
7.
Release the clip once the guides are fully inserted into the rack (see Letter F).
8.
Repeat this process with the opposite rail.
3.1.2
Installing the Chassis Into a Rack
Important Safety Note:
Due to the weight of a fully configured system, Intel recommends:
- use a mechanical lift to aid with the installation of the system into the rack, and/or
- use at least two people to install the system into the rack, or
- remove all installed modules from the system before attempting to install the system into the rack
Figure 60. Installing the Chassis into the Rack
1.
Insert the chassis onto the rails and slide it back to the rear of the rack (see Letter A).
2.
Tighten the thumbscrews on the chassis handles to secure the chassis to the rack (see Letter B).
3.
If modules were removed, install them into the chassis (see
Section 3.2.2
