Intel® Server D50TNP Family Integration and Service Guide
32
Figure 15. Pin 1 Indicator of Processor Carrier Clip
9.
Align the pin 1 indicator of processor carrier clip with one of the diagonally cut corners on the base of the
heat sink. Or (if present) look for the Pin #1 indicator on the corner of the heat sink label.
10.
Gently press down the heat sink onto the processor carrier clip until it clicks into place.
11.
Ensure all four heat sink corners are securely latched to the processor carrier clip tabs.
2.3.1.2
PHM Installation
If installed, remove the plastic cover from the processor socket.
Caution:
Do not touch the socket pins. The pins inside the processor socket are extremely sensitive. A
damaged processor socket may produce unpredictable system errors.
Figure 16. Socket Protective Cover Removal
•
Remove the socket protective cover by squeezing the finger grips (see Letter A) and pulling the
cover up (see Letter B).
•
Ensure the socket is free of damage or contamination before installing the PHM.
Caution:
If debris is observed, blow it away gently. Do not remove it manually, such as with
tweezers.
