Intel 82G35, Design Manuallines

Page: 38 / 40

Mechanical Drawings
38
Ther
mal and Mechanical Design Guidelines
Figure 19. GMCH R
e
fe
rence Heat
sink f
o
r A
T
X Plat
fo
rms – Wire Preload Clip
8 7 6 5 4 3
2
H G
F
E D C B A
8 7 6 5 4 3
2 1
H G F E D C B A
A
46.6
0.5
1.835
.019
[]
19.3
0.5
.760
.019
[]
27.3
0.5
1.075
.019
[]
2X
90
4X R
1.8
.071
[]
4
2.8
.110
[]
2X 4
36.7
1.445
[]
4
128.6
3
64.3
THIS DRAWING CONTAINS INTEL CORPORATION CONFIDENTIAL INFORMATION. IT IS DISCLOSED IN CONFIDENCE AND ITS CONTENTS MAY NOT BE DISCLOSED, REPRODUCED, DISPLAYED OR MODIFIED, WITHOUT THE PRIOR WRITTEN CONSENT OF INTEL CORPORATION.
REVISION HISTORY
ZONE
REV
DESCRIPTION
DATE
APPROVED
-
A
INITIAL RELEASE
09/06/05
-
D29082
1
A
DWG. NO
SHT.
REV
DEPARTMENT
R CORP.
2200 MISSION COLLEGE BLVD. P.O. BOX 58119 SANTA CLARA, CA 95052-8119
TMI
TITLE
PRELOAD, PWSH, BW, ATX
SIZE
DRAWING NUMBER
REV
A1
D29082
A
SCALE:
3
DO NOT SCALE DRAWING
SHEET
1
OF
1
SEE NOTES
SEE NOTES
FINISH
MATERIAL
09/06/05
DANA GRINDLE
DATE
APPROVED BY
09/06/05
DANA GRINDLE
09/06/05
C.BERMENSOLO
DATE
CHECKED BY
08/08/05
KGTAN
DATE
DRAWN BY
07/10/05
KGTAN
DATE
DESIGNED BY
UNLESS OTHERWISE SPECIFIED
INTERPRET DIMENSIONS AND TOLERANCES
IN ACCORDANCE WITH ASME Y14.5M-1994
THIRD ANGLE PROJECTION
PARTS LIST
DESCRIPTION
PART NUMBER
ITEM NO
QTY
SPRING, HSS, 8.00 LBI, 65.00MM
D29082-001
TOP
NOTES: 1. THIS DRAWING TO BE USED IN CORRELATION WITH SUPPLIED 3D DATABASE FILE. ALL DIMENSIONS AND TOLERANCES ON THIS DRAWING TAKE PRECEDENCE OVER SUPPLIED FILE AND ARE APPLICABLE AT PART FREE, UNCONSTRAINED STATE UNLESS INDICATED OTHERWISE. 2. TOLERANCES ON DIMENSIONED AND UNDIMENSIONED FEATURES UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS. TOLERANCES: LINEAR
0.25
ANGLES:
3
3. MATERIAL: TYPE: ASTM A228 MUSIC WIRE
1.8
0.1MM
4
PLATING: ELECTRO-LESS NICKEL OR EQUIVALENT UPON INTEL APPROVAL.
4
CRITICAL TO FUNCTION DIMENSION
5. MARK WITH INTEL P/N AND REVISION PER INTEL MARKING STANDARD 164997; PER SEC 3.8 (POLYETHYLENE BAG) 6. REMOVE ALL SHARP EDGES AND BURRS. 7. ALL DIMENSIONS SHOWN SHALL BE MEASURED FOR FAI 8. ALL SECONDARY UNIT DIMENSIONS ARE FOR REFERENCE ONLY.