manualshive.com logo in svg

Integral Technologies Dvx 1000, User Manual, Page: 18 / 137

Share
Download
Integral Technologies Dvx 1000 User Manual Download Page 18

14

OVERVIEW OF THE MASTERCONTROL SCREEN

The MasterControl screen is divided into three sections (see Figure 4):

•

At the top of the MasterControl screen is a row of function buttons that
allow you to switch to each function so that you can easily set up or
change configurations and schedules, perform video searches, or moni-
tor camera inputs.

•

The middle section of the MasterControl screen is reserved for the op-
eration of the function selected from the top row of buttons. This section
can include view screens, camera buttons, list boxes, and more, depend-
ing on the function selected.

•

At the bottom of the MasterControl screen is a status bar that displays
information about the current date and time, the current status of each
camera, disk usage, and whether MasterControl is currently recording.

Figure 4

The MasterControl
screen consists of
three primary
sections.

Summary of Contents for Dvx 1000










































































































































Reviews:

No comments