39
Getting Started
—Continued
If you’ve connected the NVS-7.7 to your AV receiver with a 5.1-channel analog audio connection, you
must change the SigmaTel speaker configuration as follows.
Step 14: Enable 5.1-channel Analog Audio Output
1
Click the Start button, click Control Panel, and then click “Sounds, Speech, and
Audio Devices.”
2
Click SigmaTel Audio.
The SigmaTel Audio control panel opens.
3
Click the Dolby tab, and then select “5.1 Speakers” from the Speaker Configura-
tion list.
4
Click the Close
button to close the control panel.
NVS-7.7 Hard.book Page 39 Monday, April 17, 2006 9:56 AM
