30
Getting Started
—Continued
This section explains how to connect your AV receiver or audio system to the NVS-7.7.
Choose one of the following options:
Option 1
: Digital audio connection (5.1-channel)
Option 2
: 7.1/5.1-channel analog audio connection
Option 3
: VLSC 2-channel analog audio connection
Use option #1 when you want to enjoy the Dolby Digital and DTS listening modes.
Use option #2 when you want to make an analog multichannel connection to your AV receiver or when
you want to enjoy DVD-Audio.
Option #3 uses the built-in Onkyo VLSC Vector Linear Shaping Circuitry. Use it when you want to
listen to 2-channel analog audio with the very best sound quality or listen through your TV.
Notes:
• Option #1 does not support 7.1-channel playback.
• Option #3 does not support SigmaTel Audio functions such as Dolby Virtual Speaker and
Dolby Headphone.
Option 1: Digital Audio Connection (5.1-channel)
This is the simplest way to connect your audio system for 5.1-channel playback. Connect an optical or
coaxial digital audio cable from the NVS-7.7’s OPTICAL or COAXIAL DIGITAL AUDIO OUT to an
optical or coaxial digital audio input on your AV receiver.
Notes:
• With this connection, the volume level is controlled on the AV receiver.
• To enjoy Dolby Digital and DTS, you must change a setting (see page 38).
Step 5: Connect Your AV Receiver
DIGITAL AUDIO IN
OPTICAL
COAXIAL
AV receiver
NVS-7.7 Hard.book Page 30 Monday, April 17, 2006 9:56 AM
