81
En
The AV receiver can upconvert component video, S-
Video, and composite video sources for display on a TV
connected to the HDMI output(s). However, if the picture
quality of the source is poor, upconversion may make the
picture worse or disappear altogether.
In this case, try the following:
Important Note Regarding Video Playback
1
If the video source is connected to a component
video input, connect your TV to the
COMPONENT VIDEO MONITOR OUT
.
If the video source is connected to an S-Video input,
connect your TV to a
MONITOR OUT S
.
If the video source is connected to a composite video
input, connect your TV to the
MONITOR OUT V
.
2
On the main menu, select “Input/Output Assign”
and then “Component Video Input” (
➔
page 45
).
If the video source is connected to
COMPONENT
VIDEO IN 1
, select the relevant input selector, and
assign it to “
IN1
”.
If the video source is connected to
COMPONENT
VIDEO IN 2
, select the relevant input selector, and
assign it to “
IN2
”.
If the video source is connected to
COMPONENT
VIDEO IN 3
, select the relevant input selector, and
assign it to “
IN3
”.
If the video source is connected to an S-Video input
or composite video input, select the relevant input
selector, and assign it to “
- - - - -
”.
