56
En
■
Fixed Mode
`
Off
:
The format is detected automatically. If no digital
input signal is present, the corresponding analog
input is used instead.
`
PCM
:
Only 2-channel PCM format input signals will be
heard. If the input signal is not PCM, the
PCM
indicator will flash and noise may also be produced.
`
DTS
:
Only DTS (but not DTS-HD) format input signals
will be heard. If the input signal is not DTS, the
DTS
indicator will flash and there will be no sound.
When “
HDMI
”, “
COAXIAL
” or “
OPTICAL
” is
selected in the “
Audio Selector
” setting, you can then
specify the signal type in “
Fixed Mode
”.
Normally, the AV receiver detects the signal format
automatically. However, if you experience either of the
following issues when playing PCM or DTS material, you
can manually set the signal format to PCM or DTS.
• If the beginnings of tracks from a PCM source are cut
off, try setting the format to PCM.
• If noise is produced when fast forwarding or reversing a
DTS CD, try setting the format to DTS.
Note
• The setting is stored individually for each input selector.
• The setting will be reset to “
Off
” when you change the setting in
“
Audio Selector
” (
➔
page 55
).
Charge Mode
■
Charge Mode
`
Auto
:
Power feeding is interrupted when your iPod/iPhone
is fully charged.
`
On
:
Power feeding continues even if your iPod/iPhone is
fully charged.
`
Off
:
Your iPod/iPhone is not charged.
You can specify how the power is fed to your iPod/iPhone
when the AV receiver is in standby mode.
Note
• This setting cannot be selected when:
– the UP-A1 Dock with docked iPod/iPhone is not connected to
the AV receiver, or
– the docked iPod/iPhone model is not supported.
• When the “
Charge Mode
” setting is set to “
On
”, or to “
Auto
”
with your iPod/iPhone recharging, the
SLEEP
indicator is dimly
lit in standby mode. In such conditions, the power consumption
of the AV receiver slightly increases. With “
Auto
”, when the
iPod/iPhone becomes fully charged, the
SLEEP
indicator goes
off and the power consumption in standby mode is reduced.
You can assign a default listening mode to each input
source that will be selected automatically when you select
each input source. For example, you can set the default
listening mode to be used with Dolby Digital input
signals. You can select other listening modes during
playback, but the mode specified here will be resumed
once the AV receiver has been set to standby.
Main menu
Listening Mode Preset
■
Analog / PCM / Digital
With this setting, you can specify the listening mode
used when an analog (CD, TV, LD, VHS, MD,
turntable, radio, cassette, cable, satellite, etc.) or PCM
digital (CD, DVD, etc.) audio signal is played.
■
Mono/Multiplex Source
With this setting, you can specify the listening mode
used when a mono digital audio signal is played (DVD,
etc.).
■
2ch Source
With this setting, you can specify the listening mode
used when 2-channel (2/0) stereo digital sources, such
as Dolby Digital or DTS, are played.
■
Dolby D/Dolby D Plus/TrueHD
With this setting, you can specify the listening mode
used when Dolby Digital or Dolby Digital Plus format
digital audio signals are played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
Listening Mode Preset
1
Use
q
/
w
to select the input source that you want to
set, and then press
Enter
.
The following menu appears.
2
Use
q
/
w
to select the signal format that you want to
set, and then use
e
/
r
to select a listening mode.
Only listening modes that can be used with each input
signal format can be selected (
➔
pages 35
to
39
)
.
The “
Last Valid
” option means that the listening
mode selected last will be used.
Note
• If you connect an input component (such as UP-A1 series
Dock that seated iPod) to the
UNIVERSAL PORT
jack,
the only listening modes you can assign to the “
PORT
”
selector are specific to analog sound.
• For the
Tuner
input selector, only “
Analog
” will be
available.
• For the
NET
or
USB
input selector, only “
Digital
” will be
available.
1. BD/DVD
2. VCR/DVR
3
. CBL/
S
AT
4. GAME
5. PC
6. AUX
5. Li
s
tenin
g
Mode Pre
s
et