65
En
Zone 2 Video Output
The AV receiver features a composite video output for con-
nection to a TV in Zone 2, so you can enjoy both audio and
video in that zone.
Note
• The
ZONE 2 OUT
V
jack outputs video from components con-
nected to composite video inputs.
■
Zone 2 Out
See “
Zone 2 Out
” in “
Hardware Setup
” (
➔
page 58
).
■
Zone 2 Maximum Volume
See “
Zone 2 Maximum Volume
” in “
Hardware
Setup
”(
➔
page 58
).
■
Zone 2 Power On Volume
See “
Zone 2 Power On Volume
” in “
Hardware Setup
”
(
➔
page 58
).
■
Operating on the AV receiver
■
Operating on the remote controller
To control Zone 2, you must press
Zone2
on the remote
controller first.
Hookup
• Use a composite video cable to connect the AV receiver’s
ZONE 2 OUT
V
jack to a composite video input on your
Zone 2 TV.
Setting the Zone 2 Out
Main room
TV
Zone 2
AV receiver
TV
Controlling Zone 2 Components
1
To turn on Zone 2 and select an input source, press
Zone 2
followed by an input selector button within
8 seconds.
Zone 2 turns on, the
Z2
indicator lights on the display.
Tip
• The corresponding trigger output goes high (+12 V).
To select AM or FM, press the
Tuner
input selector
and
Zone 2
repeatedly.
To select the same source as the main room’s, press
Zone 2
repeatedly until “
Z2 Selector: Source
”
appears on the display.
To turn off Zone 2, press
Off
.
The zone is turned off.
Tip
• The corresponding trigger output goes low (0 volts).
1
Press
Zone2
and then press
8
Receiver
.
Zone 2 turns on, the
Z2
indicator lights on the display.
Tip
• The corresponding trigger output goes high (+12 V).
2
To select an input source for Zone 2, press
Zone2
,
followed by an input selector button.
To select AM or FM, press the
Tuner
input selector
and
Zone2
repeatedly.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same AM/FM radio
station will be heard in each room.
Input selector buttons
Zone 2
Off
Zone 2 Level
q
/
w
Tone
+, –
Input selector buttons
8
Receiver
Zone2
Muting
VOL
q
/
w
