INSYS StyleNote M74*S series User Manual Download Page 252

Page: 252 / 288

Windows XP Information

E - 52 3.75G/HSPA Module

Mobile Partner

With the

3.75G/HSPA

module and USIM card (supplied by your service provider) installed you may then install

the

Mobile Partner

application. The

Mobile Partner

application allows you to directly access your HSPA in-

ternet service from the computer.

Mobile Partner Application Installation

Enable power to the module

by pressing the

Fn +

key combination (the module must be

when

the driver is being installed).

Note

: If a

Found New Hardware

window appears (three windows may appear with this message)

click

Cancel

in all windows that appear, and then proceed to install the driver as below.

2. Insert the

Device Drivers & Uti User’s Manual

disc

into the CD/DVD drive.

3. Click

Option Drivers

(button).

4. Click

3. 3G Driver

> Yes

5. Choose the language you prefer and click

6. Click

I Agree

(button) to accept the license agreement.

7. Click

Next > Install

8. Click

Finish

to restart the computer.

9. Access the

Mobile Partner

application from the

Start

menu (

Start > Programs/All Programs >

Mobile Partner

), or by double-clicking the

Mobile Partner

icon on the desktop.

Summary of Contents for StyleNote M74*S series

































































































































































































































































































Search results

Summary of Contents for StyleNote M74*S series

Reviews:

Related manuals for StyleNote M74*S series

Brands by name

Popular brands

INSYS StyleNote M74*S series, User Manual

Search results

Summary of Contents for StyleNote M74*S series

Reviews:

Related manuals for StyleNote M74*S series

Brands by name

Popular brands