INSYS StyleNote M74*S series, User Manual

Page: 135 / 288

Modules & Options
3.75G/HSPA Module 7 - 21
7
1. Turn off the computer, and turn it over and remove the battery .
2. Access the SIMLOCK as follows:
• For Models A - F : Locate the SIM card cover and loosen screw , and then
remove the SIM card cover .
• For Models G & H : Locate the RAM & CPU bay cover and remove screws
- (the SIMLOCK is located at point ), then carefully (a fan and cable are
attached to the under side of the cover) lift up the bay cover. Carefully discon-
nect the fan cable
, and remove the cover.
Power Safety
Warning
Before you undertake
any installation proce-
dures, make sure that
you have turned off the
power, and disconnect-
ed all peripherals and
cables (including tele-
phone lines). It is advis-
able to also remove your
battery in order to pre-
vent accidentally turning
the machine on.
Figure 7 - 14
SIM Card Cover/Bay
Cover Removal
1
2
3
5 6
7
2
1
3
4
5
6
7
Fan Cable
Make sure you re-
connect the fan
cable
before
screwing down
the bay cover for
Models G & H .
7
Models A - F Models G & H