13
ATTACH THE TRACK ASSEMBLY
•
Hold the
Track Assembly
and carefully slide it onto the
mounting tube
of the main frame.
•
Use your hands to carefully tighten two
M8 x 16 mm Hex Socket Head Bolt (B5)
and
M8 x
16 mm x 1.5 mm Flat Washers (B7)
on the bottom of the Track.
•
Raise and hold the
Seat Carriage Assembly
with one hand and with the other carefully
tighten
two M8 x 16 mm Hex Socket Head Bolts (B5)
and
M8 x 16 mm x 1.5 mm Flat
Washers (B7)
on the top of the Track.
•
When all four bolts and washers are in place, tighten them securely with the 6-mm Allen Key.
•
Gently lower the Seat Carriage until it stops.
Make sure you connect the parts in the same order as shown on the picture.
Make sure the bolts are tightened fully.
