![background image](http://html1.mh-extra.com/html/insportline/air-master/air-master_user-manual_2069170011.webp)
11
ATTACH THE REAR STABILIZER AND THE REAR HANDLE
1. Attach the rear stabilizer.
•
Remove the
four M8 x 20 mm Hex Socket Head Bolts (B5)
and
M8 x 16 mm x 1.5 mm Flat
Washers (B7)
from both sides of the rear end of the
Track
with the 6-mm Allen Key.
•
Attach the
Rear Stabilizer (C)
to the rear end of the rack with
four M8 x 20 mm Hex Socket
Head Bolts (B5)
and
M8 x 16 mm x 1.5 mm Flat Washers (B7)
, then tighten the bolts with
the 6-mm Allen Key.
Connecting material
Tools
B5 (4 pcs)
B7 (4 pcs)
6 mm
Make sure you connect the parts in the same order as shown on the picture.
Make sure the bolts are tightened fully.
2. Attach the rear handle.
•
Remove the
four M6 x 16 mm Hex Socket Head Bolts (B9)
from the
Track
with the 5-mm
Allen Key, as shown in the picture.
•
Attach the
Rear Handle (G)
to the middle of the
Track
with four
M6 x 16 mm Hex Socket
Head Bolts (B9)
, then tighten the bolt with the 5-mm Allen Key.