Innovative BV100, Operation Manual

Page: 9 / 47

Copyright Innovative Technology Ltd 2008 GA717
16
15
1
2
4.2.2 INTERFACE CONNECTOR PIN DETAILS
The connector pin details are described below
(see table 5); they use an IDC 16-pin 0.1" pitch
header with 2 rows of 8 pins.
.
Pin Name Description
1 Vend 1 Open collector outputs. Function changes depending on
machine interface protocol (see individual interface
descriptions for details.) Also the Pulse Steam output.
Also the Serial Output pin in SSP Serial Mode
and other serial modes.
2 Vend 2
3 Vend 3
4 Vend 4
Open collector outputs. Function changes depending on
machine interface protocol (see individual interface
descriptions for details).
5 Inhibit 1 Inhibit channel 1 by holding this pin HIGH. To Enable a
channel the inhibit must be held LOW. Also the serial
Input pin in SSP Serial Mode, and other serial modes.
6 Inhibit 2 Inhibit channel 2 by holding this pin HIGH
7 Inhibit 3 Inhibit channel 3 by holding this pin HIGH
8 Inhibit 4 Inhibit channel 4 by holding this pin HIGH
9 Busy BV100 is validating and stacking output. Active low while
the BV100 is reading, transporting or stacking a note
10 Escrow Operate Escrow function by holding LOW (see Appendix B
– Escrow Control for full details).
11 Factory use only Do not connect
12 Factory use only Do not connect
13 Factory use only Do not connect
14 Factory use only Do not connect
15 +Vin Nominal 12V DC supply
16 0V 0V supply
Table 6 – 16 Pin Connector Details
BV100 Operations Manual
9
BV100 Operations Ma
Figure 5 – Pin detail