Innovative BV100, Operation Manual

Page: 13 / 47

Copyright Innovative Technology Ltd 2008 GA717
For the USA the country code is 00 01, or 18 40
For Great Britain the code is 00 44, or 18 26.
The scaling factor must also be specified for each Validator. All accepted note values must
be evenly divisible by this number.
· This number would be set to 100 (Hex 64) for the Euro or Great Britain.
· The number would be set to 1000 (Hex 03E8) for Colombia.
The number of decimal places must also be programmed for each Validator
· The number would be set to 2 for Euro or USA
· The number would be set to 3 for Colombia
Adopting the numbers above.
· £5 would be displayed as 5.00
· £10 would be displayed as 10.00
· $1 would be displayed as 1.00
· 1K Colombia would be displayed as 1.000
4.3.4 SERIAL INPUT/OUTPUT – SIO
Existing Smiley
®
NV4 - NV10 users may already be using the serial input/output facility
in conjunction with the parallel inputs. The BV100 Validator also supports this system.
However this interface is not recommended for new designs, the Smiley
®
Secure Protocol
SSP interface is recommended.
CAUTION
· The BV100 does not support the simple serial data out only mode as available on NV4
and earlier models NV2 and NV3. It only supports the serial data input/output mode.
· The host machine does not echo messages back to the validator.
· The BV100 does not operate in true RS232 mode. (Only TTL level).
To use Serial Input/Output mode, the SIO interface must be programmed into the validator
via the Configuration Cards (See Appendix D – Configuration Cards) or via the ITL BNV
Currency Manager Program.
There are 4 different combinations of SIO available:
SIO 300 Baud
SIO 300 Baud (Disabled at Start up) - A software enable must be sent to enable the
validator.
SIO 9600 Baud
SIO 9600 Baud (Disabled at Start up) - A software enable must be sent to enable the
validator.
BV100 Operations Manual 13
BV100 Operations Manual 13