Innovative BV100, Operation Manual

Page: 6 / 47

Copyright Innovative Technology Ltd 2008 GA717
3 GENERAL DESCRIPTION
The BV100 Bank Note System is a compact note-
validating machine (see Figure 1), suitable for most
money machines. It will accept up to 16 different
denominations of notes in the serial control mode.
The BV100 is designed for easy installation in most
machines. To see the general dimensions of the BV100,
refer to Appendix B - BV100 Mechanical Installation.
Figure 1 - The BV100 validator
Currency
The BV100 Validator leaves the factory preset to at least one currency so that it is ready for
immediate installation. If the currency data set needs to change this may be done using the
PC based Validator Management Software. New currencies and applications are being tested
all the time, please refer to our web site or contact the factory for information concerning
specific currencies if they are not already included on our approved list.
Cash box
Various size cash boxes are available for the BV100. The standard cash box will hold
approximately 300 notes. Cash box spacers can be added at the factory to increase the
capacity. Each spacer will add an extra 200 note capacity with a maximum of 3 spacers. This
gives a maximum capacity of approximately 900 notes. (See Appendix C - BV100 Cash Boxes
for more details). Cash box capacity must be stated at the time of ordering. If no capacity is
specified, the standard cashbox will be delivered. Note: Cash box spacers can only be added at
our factory, and once fitted cannot be removed.
Secure lock for the cash box
A lock can be fitted to the BV100 to secure the cash box in place. A lock such as Camlock,
product reference 2181D can be used.
Bezel sizes
The BV100 validator is available with either a 66 mm or 72 mm Bezel. See drawing
number GA700 in Appendix B - BV100 Mechanical Installation, for general dimensions.
Interface
Interfacing the validator is very simple, with the choice of the following protocols:
SSP CCTALK MDB SIO
PARALLEL PULSE BINARY NIS
IF30 IF31 IF32
Table 4 – Available Interfaces / Protocols
For detailed information about the different interfaces see Chapter 4.3.
BV100 Operations Manual 6