Innovative BV100, Operation Manual

Page: 19 / 47

Copyright Innovative Technology Ltd 2008 GA717
5 LOW POWER OPTION
Low power Mode can be used with all none serial communication protocols to reduce the
power consumption of the BV100 when idle.
When the BV100 is in this state the current consumption is reduced. The BV100 goes into
low power mode approximately 6 seconds after the validator is powered up and remains
in this state until a note is entered (Time A, Figure 10). Following a note insertion the
BV100 returns to Low Power mode approximately 1 second after the Busy line goes High
(After credit is given or note is rejected). (Time B, Figure 10)
Table 10 - Electrical requirements and characteristics for low power mode
Notes:
· Low Power Mode can ONLY be used with the above Parallel, Pulse and Binary protocols.
· Low power mode can only be enabled by correctly completing the configuration cards or
via the ITL BNV Currency manager program.
· In Low Power Mode the front sensor is checked every 1 second which can lead to a
delay in accepting the note when it is presented.
· Configuration button functions are only available during power up before the BV100 goes
into Low Power Mode.
Electrical Supply Minimum Maximum
Supply Voltage (V DC)
Absolute Limits
+11.5V +14.2V
MDB IF5 Version Supply
Voltage
+18V +48V DC or 34V AC
MDB Hardware version +18V +48V DC
Supply Ripple Voltage 0 V 0.25 V @ 100 Hz
Supply Currents:
Sleep (Low Power Mode) TBC
Standby 230mA
Validating 500mA
Peak Motor Stall
2000mA
BV100 Operations Manual 19