w w w . i n n o v a i r . c o m
DELUXE
Inverter
Service
M
anual
per pressing, to enable your required timer.
c. Press "TIMER" button again, to set the timer off function.
7.
“
DISPLAY
” bu
tton
You can
make
the LCD
screen
work or not by pressing this button.
8.
“
”
or
“
”
bu
t
ton
Press the “ ”or “
” button, you can set the temperature range from 16
℃
to 32
℃
, display will
change when you touch the button.
9. "iClean" button
a. When remote controller is at the off state, press "iClean" button, the wind guiding bars turn to initial
positions for cooling, the A/C runs "iClean" function with max duration
of
35mins.The purpose of
this
function is to clean dust on evaporator and dry the inside water of evaporator to prevent the
evaporator
from
producing
mold due to water deposition and
release a
strange smell.
b. After setting "iClean" function, press "iClean" button again to cancel "iClean" function or press
"ON/OFF" button to cancel "iClean" function and start A/C.
c. The clean function will be stop working after 35 minutes running working without any operation.
Note: "iClean" function can be set in parallel with "time start" function; in this case "time
start" function will be executed after "iClean" function.
10. "MODE" button
It
enables you to select different operation mode
s. A
fter each pressing
t
he operation mode will be
changed. It shows in the following display.
AUTO
→
COOL
→
DRY
→
HEAT
→
FAN
→
AUTO
Remark: cold wind type has no heating function.
11
. “SLEEP” but
ton
1. Press the "SLEEP
"
button to enter SLEEP mode.
2. Then in COOL or HEAT mode, the set temperature will be automatically controlled based on
sleeping time.
3. The unit will automatically exit SLEEP function when the sleeping time is up.
Remark: press the MODE or ON/OFF button
and
remote controller clears sleeping mode away.
12. “SWING
" button
Press this button, the horizontal wind direction vanes can swing automatically when you have the
desired vertical wind direction
p
ress it again the horizontal wind direction vanes will be stopped at
the
air position
of your choice.
13. “HEALTH” button
Press this button, you can turn on or off the health function.
14.
“
Anti-FUNGUS
”
button
This A/C has special dry and anti-mold function which has
two selections:
"yes" or "no". This
function is controlled by the remote controller under cooling
,
dry
,
and auto (cooling and dry)
modes,
the horizontal wind guiding bars are at the initial position for cooling. The A/C runs under heating
mode
6
