innovair D1N13C23A20, Service Manual

Page: 8 / 87

DELUXE Inverter
Service M anual
N ote:
Most
remote control
s
contain the
same
function buttons.
Depending on the model, th
ey
may be slightly different.
1.
“
ON/OFF
”
button
You can start or stop the air-conditioner by pressing this button.
2.
“
SPEED
”
button
You can select fan speed as the following:
3.
“
SWING
”
button
Press the button to establish the vertical and horizontal angles of the air circulation. W
hen you have
the desired horizontal wind direction, press it again
to establish
the vertical wind direction vanes
will be stopped at the
direc
tion of your choice.
4. “iFeel” button
Press the button and when the
"iFeel"
symbol is displayed
:
T
his button can be used to set the feeling function. The LCD shows the actual room temperature
whe
re
the function
is
set and it shows the setting temperature when the function cancelled.
This function is invalid when the appliance
is in
Fan mode.
5.
“
TURBO
”
button
The “TURBO” function is used for fast cooling or heating. Press this button under
the cooling or
heating mode
and
the fan
will operate at the maximum
speed
to quickly reach the desired
temperature. T
he LCD
will
display “TURBO”
.
6. “TIMER” button
Setting the "ON" timer time:
a. When remote controller is
"
off
"
, press
the
"TIMER" button
. T
he LCD displays
"
TIMER ON" and
the timer time
. T
he range of
the
setting time is
from 0
.5h to 24h.
b. You can press the “ ” or “ ” button to adjust the timer time
. E
ach touch will be set time to
increase or reduce
0
.5h before 10 hours ago, after ten hours will be set time to increase or reduce 1h
per pressing to enables your required timer.
c. Press “TIMER” button again to
return to
function.
d.
S
e
t
another function to insure
the
air conditioner turn
s
on
in the settings desired
(including
mode
,
temperature
,
swing
,
fan speed
,
etc). LCD will display
and store
all your setting
s. W
hen the
timer reach
es
the set time, the air conditioner will work
automatically
according to
your set-up
.
Setting the
“
OFF
”
timer time:
a. When remote controller is at
"
on
"
state, press “TIMER” button the LCD displays “TIMER OFF” and
the timer time, the range of setting time is
0
.5h to 24h.
b. You can press the“ ”or “ ” button to adjust the timer time
. E
ach touch will
increase or
reduce time in 0
.5h
to
10 hours
. A
fter ten hours will be set time to increase or reduce 1h
5