DELUXE In
verter
Service
M
anual
Electrical
Parts
(Main PCB)
1) Take all the connector
PCB upper side out.
(Including
Power cord)
2) Detach the outdoor unit
connection wire from the
terminal block.
3) If pulling the main PCB up,
it will be taken out.
A
ir vent,
louver link
Remove axial sleeve of louver
link, bend the air vent outwards
and then remove the air vent
and louver link.
Pipeline
clamp
Remove the Pipeline clamp.
Mounting
plate
Remove the Mounting plate.
Heat
Exchanger
1) Loosen fixing earth screws of
right side.
2) Detach the connection pipe.
3) Detach the holder pipe at the
rear side.
4) Loosen fixing screws of right
and left side.
5) Detach the heat exchanger
from the indoor unit.
55
