20
700-398-01J X-Series User Manual Issued for version 2.8x
LCD Keypad
[*] [MASTER CODE] [*] [4] [*] [SLOT NUMBER] [*] [#]
1.
Enter the User Program Mode as per steps 1 - 4 of section User Program Mode.
2.
The LCD display reads ‘Option Menu’, ‘Add User Code’.
3.
To select menu option 4 – ‘Delete Slot’, press the [4] key, or alternatively use the [PANIC] or [MED] keys
to scroll through the list of programmable options until you reach the option you want.
4.
Press the [*] key.
5.
The LCD display reads ‘Slot + *’.
6.
Enter the [SLOT NUMBER] for the User Code you wish to delete followed by the [*] key.
7.
Further User Codes may be deleted by repeating step 5.
8.
Press the [#] key to exit User Program Mode.
View a User Code Slot Number – Option 5
LED Keypad
Hold down the [*] key until the beep, then enter [MASTER CODE] [*] [5] [*] [USER CODE] [*] [#]
1.
Enter the User Program Mode as per steps 1 to 4 in section User Program Mode.
2.
Press the [5] key followed by the [*] key to select programmable option 5.
3.
The READY and ARM LEDs flash simultaneously.
4.
Enter the [USER CODE] followed by the [*] key.
5.
The READY and ARM LEDs flash simultaneously.
6.
The User Code slot number will be displayed by the Zone LEDs. (Refer to Table 2.)
7.
Press the [#] key to exit the current option.
8.
Press the [OPTION NUMBER] followed by the [*] key for the next option, or the [#] key again to exit user
programming.
LCD Keypad
[*] [MASTER CODE] [*] [5] [*] [USER CODE] [*] [#]
1.
Enter the User Program Mode as per steps 1 - 4 of section User Program Mode.
2.
The LCD display reads ‘Option Menu’, ‘Add User Code’.
3.
To select menu option 5, ‘View Slot’, press the [5] key or alternatively use the [PANIC] or [MED] keys to
scroll through the list of programmable options until you reach Option 5. Press the [*] key.
4.
The LCD display reads ‘User Code + *’.
5.
Enter the [USER CODE] followed by the [*] key, the slot number is displayed on the keypad.
6.
Further slot numbers may be viewed by repeating step 5.
7.
Press the [#] key to exit the User Program Mode.
User Code Properties – Option 10
LED Keypad
Hold down the [*] key until the beep, then enter [MASTER CODE] [*] [1] [0] [*] [USER CODE/SLOT] [*]
[BITMAP] [*] [#]
1.
Enter the User Program Mode as per steps 1 to 4 in section User Program Mode.
2.
Press the [1] [0] keys followed by the [*] key to select programmable option 10.
3.
The READY and ARM LEDs flash simultaneously.
4.
Enter the [USER CODE] or [Slot number] followed by the [*] key.
5.
The READY and AWAY LEDs flash simultaneously, and the ARM LED will be on.
6.
The properties assigned to the user code are displayed by the Zone LEDs. LED(s) that are on indicate that
certain properties have been assigned to the user code. Refer to Table 8 for a list of user code
properties.
7.
To select a user code property, press the key which corresponds to that property followed by the [*] key.
The appropriate zone LED will come on. To deselect a property, press the corresponding key followed by
the [*] key and the LED will be turned off. (LCD keypad press [*] again to turn N to Y or Y to N).
EXAMPLE: To enable a user code to function as a duress code press the [2] key followed by the [*] key. Zone 2
LED confirms the selection.
8.
Repeat step 7 until the desired properties have been programmed.
9.
Press the [#] key to exit the current option.
10.
Press [OPTION NUMBER] followed by the [*] key for the next option, or the [#] key again to exit user
programming.
