19
700-398-01J X-Series User Manual Issued for version 2.8x
3.
To select menu option 2 – ‘Delete User Code’, press the [2] key or alternatively use the [PANIC] or [MED]
keys to scroll through the list of programmable options until you reach Menu Option 2. Press the [*] key.
4.
The LCD display reads ‘User Code + *’.
5.
Enter the [USER CODE] to be deleted followed by the [*] key. 'Deleting' the code in slot one will
reprogram it to 1234.
6.
Further codes may be deleted by repeating step 5.
7.
Press the [#] key to exit User Program Mode
Add/Edit Slot – Option 3
LED Keypad
Hold down the [*] key until the beep, then enter [MASTER CODE] [*] [3] [*] [SLOT NUMBER] [*] [USER CODE]
[*] [#]
1.
Enter the User Program Mode as per steps 1 to 4 in section User Program Mode.
2.
Press the [3] key followed by the [*] key to select Menu option 3.
3.
The READY and ARM LEDs flash simultaneously.
4.
Enter the [SLOT NUMBER] to be added/edited followed by the [*] key.
5.
The READY and AWAY LEDs flash simultaneously, and the ARM LED is on.
6.
Enter the [USER CODE] followed by the [*] key.
7.
The READY and ARM LEDs flash simultaneously.
8.
Further slots may be added/edited by repeating steps 4 - 7.
9.
Press the [#] key to exit the current option.
10.
Press the [OPTION NUMBER] followed by the [*] key for the next option, or the [#] key again to exit user
programming.
LCD Keypad
[*] [MASTER CODE] [*] [3] [*] [SLOT NUMBER] [*] [USER CODE] [*] [#]
1.
Enter the User Program Mode as per steps 1 - 4 of section User Program Mode.
2.
The LCD display reads ‘Option Menu’, ‘Add User Code’.
3.
To select menu option 3 – ‘Add/Edit Slot’, press the [3] key or alternatively use the [PANIC] or [MED]
keys to scroll through the list of programmable options until you reach the option you want.
4.
Press the [*] key.
5.
The LCD display reads ‘Slot + *’.
6.
Enter the [SLOT NUMBER] to be added/edited followed by the [*] key.
7.
The LCD display reads ‘New Code + *’, ‘Slot number’.
8.
Enter the [USER CODE] followed by the [*] key.
9.
Further slots may be added/edited by repeating steps 6 - 8.
10.
Press the [#] key to exit User Program Mode.
NOTE: A slot is just a place holder for a user code. I.e. User code 1 is in slot 1 all the way to user code 128 is in
slot 128.
Delete a User Code – Option 4 (Slot Known)
LED Keypad
Hold down the [*] key until the beep, then enter [MASTER CODE] [*] [4] [*] [SLOT NUMBER] [*] [#]
1.
Enter the User Program Mode as per steps 1 to 4 in section 0.
2.
Press the [4] key followed by the [*] key to select Menu option 4.
3.
The ARM and READY LEDs flash simultaneously.
4.
Enter the [SLOT NUMBER] for the user code you wish to delete followed by the [*] key. You can
determine the slot number of a particular code by using programmable option 5.
5.
The READY and ARM LEDs flash simultaneously.
6.
Further user codes may be deleted by repeating step 4.
7.
Press the [#] key to exit the current option.
8.
Press the [OPTION NUMBER] followed by the [*] key for the next option, or the [#] key to exit
programming.
