INGENIA TRI-1/48-C-C Product Manual Download

Page: 41 / 42

TRITON CORE Product Manual |

Application Software

INGENIA | 2021-07-07 16:23:18

8 Application Software

8.1 Configuration

To connect, configure, tune your motor or upgrade the firmware of the Triton Core, install Ingenia

Motion

Lab

suite

. The software package includes USB drivers.

8.2

Applications

If you want to make your own application to communicate with the Triton and develop standalone or multiaxis

systems you can use the multi-platform library

MCLIB

8.3

Arduino

To start an Arduino based project easily, connect using the serial UART pins of the Triton and use our Arduino
Library

Ardulib

Please make sure that your Arduino board has a RS232 port, or that a suitable adaptor is used.

Keep the firmware updated

Before configuring your drive for a new application make sure you have upgraded to the latest firmware
revision.



Summary of Contents for TRI-1/48-C-C











































Search results

Summary of Contents for TRI-1/48-C-C

Reviews:

Related manuals for TRI-1/48-C-C

Brands by name

Popular brands

INGENIA TRI-1/48-C-C, Product Manual

Search results

Summary of Contents for TRI-1/48-C-C

Reviews:

Related manuals for TRI-1/48-C-C

Brands by name

Popular brands