Infranor Xtracontrol DC2 User Manual Download

Page: 53 / 87

User Manual V1.3 | XtracontrolDC2, XtracontrolET2, XtracontrolEC21

The device is now configured and ready for use.

6.2.2

XtracontrolET2

The device must be connected to the network with the correct settings before it can be used.

NOTICE

Damage to property

▶

Before connecting the power supply, ensure that all cabling is

correct, including the polarity of all the connections.

Supply the device with power (24 V).

After startup the current network settings are displayed (server IP, IP-address and netmask).

Fig. 35: Startup page with network settings

Press the button ”Configuration”.

A page with further information appears.

Fig. 36: Info page

Press the button ”Next”.

The page with the current network settings of the device appears.

Summary of Contents for Xtracontrol DC2
























































































Search results

Summary of Contents for Xtracontrol DC2

Reviews:

Related manuals for Xtracontrol DC2

Brands by name

Popular brands

Infranor Xtracontrol DC2, User Manual

Search results

Summary of Contents for Xtracontrol DC2

Reviews:

Related manuals for Xtracontrol DC2

Brands by name

Popular brands