User Manual V1.3 | XtracontrolDC2, XtracontrolET2, XtracontrolEC21
6.2
Network start-up
6.2.1
XtracontrolDC2
The device must be connected to the network with the correct settings before it can be used.
NOTICE
Damage to property
▶
Before connecting the power supply, ensure that all cabling is
correct, including the polarity of all the connections.
1.
Supply the device with power (24 V).
After startup, the current IP-address and netmask of the XtracontrolDC2 are shown in the top right of the display.
2.
Connect the device to a programming computer using a network cable (X4) and network switch.
3.
Open a web browser on the programming computer.
4.
Enter the IP address of the device into the web browser.
The login screen will appear.
Fig. 32: login window
5.
Use the following user name and password to log into the device:
Name: admin
Password: admin
© Infranor GmbH
51
Summary of Contents for Xtracontrol DC2
Page 1: ......
