User Manual V1.3 | XtracontrolDC2, XtracontrolET2, XtracontrolEC21
USB
The USB host interface allows a wide range of peripherals to be connected to the device. This allows a USB stick to
be used for updating the application or for downloading data directly.
USB sticks with FAT/FAT32 formatting are supported.
If you require support for other USB formats, please contact our Technical Support.
CAN interfaces
The device has one standard CAN interface which can be used at a speed of up to 1 Mbit/s.
Serial interfaces
The device has 2 serial interfaces (1x RS-485; 1x RS-232).
Onboard inputs / outputs
The device incorporates digital inputs / outputs and analogue inputs.
Additional interfaces
There is also a debugging interface located on the device. A special cable with a 3.5 mm jack plug can be connected
to this interface. For further information, please contact our customer services team.
Real-time clock
A software interface permits the current time and date to be set and read on a real-time clock with battery back-up.
microSD card
The standard commercial microSD card interface allows data to be written to memory cards or read from memory
cards.
18
©
Infranor GmbH
Summary of Contents for Xtracontrol DC2
Page 1: ......
