Use
r’s
Manual of OMNI Express Patient Monitor
- 12
037.007.0001 Rev.2
SYSTEM SETUP
System Setup includes: Factory Setup, Optional Module, Waveform Select, Printer,
Config Manager, Language, Display Mode, Alarm Suspend, Sweep Direction and etc.
Press the button of
SETUP
to pop up the menu below:
System Setup
Factory Setup
Optional Module
Waveform Select
Printer
Sound Level
Config Manager
Language
Demo
Display Mode
Alarm Suspend
Sweep Direction
Screen Cal
EtCO
2
Module
Channel 3
Channel 1
……
Alarm Print
Status
Grid Output
Waveform 2
Auto Print
Waveform 1
Waveform 3
Hospital Name
Load User Config
Save Current Config
Parameters Only
Delete User Config
Export User Config
Heart Sound
About
QTemp Module
Gas Module
Figure 7: Tree Diagram for System Setup Menu
FACTORY SEVICING SETUP
Servicing engineers use only.
1. If inputting
“IP SETUP” for the password, the window for Ethernet IP address setup of
the Patient Monitor will open. It is used to connect the Patient Monitor and the Central
Station. This IP address is available only when the patient monitor is re-powered on.
2. If inputting
“NUIPSET.” for the password, you can set the remote address, which
should be as same as server IP when you upgrade the program using Ethernet.
