Use
r’s
Manual of OMNI Express Patient Monitor
- 11
037.007.0001 Rev.2
All TFT display screen is divided into three areas:
WAVEFORM AREA
This area will display the waveforms: ECG, Pleth, Resp, EtCO
2
and Gas. The waveform
channel number is determined by the choice of Display Mode. Displaying waveforms are
dependent on the choice of Waveform Select.
PARAMETER AREA
This area consists of HR, Resp, SpO
2
, Temp, NIBP(SYS
、
DIA
、
MAP), EtCO
2
, Gas and so
on.
MESSAGE AREA
Time, Patient Information, Power State and some prompt information are listed here.
Assuming the main screen is being displaying, touch each menu item, it can open the
corresponding menu for setup. Access to selected item (and enter submenu if available).
Once a selection has been made, touch an appropriate selection will exit from the menu
item (or submenu) and register the current selection. If you want to exit from menu, just
touch the menu item of EXIT or OK (or CANCEL).
