2 – 3
Transpector SPS Operating Manual
Figure 2-2 Heat Guard and Calibration Reference Bracket
WARNING - High Temperature
Metal surfaces will be hot when heating jacket is on.
Attach heat guard to avoid risk of burns from metal
surfaces between Transpector electronics module and
Transpector SPS manifold tee.
2.2.3 Attach Cable Box
The cable box and Transpector electronics module are connected via an Ethernet
connection, a 15-pin Aux I/O connection, and a 62-pin extended I/O connection.
Three screws are used to stabilize the cable box on the electronics module.
(See
.)
To connect the cable box to the electronics module:
1
Insert the Ethernet jack on the cable box into the Ethernet port on the
electronics module.
2
Carefully insert the 15-pin Aux I/O and 62-pin extended I/O connectors until
they are secure and the Ethernet connector snaps into place.
3
Secure the cable box on the electronics module with the three provided screws.
Calibration Reference
Shipping Bracket
Heat Guard
Calibration Reference
Standard Bracket
Transpector Electronics Module
Mounting Nut
