2 – 5
Transpector SPS Operating Manual
T-Nut M6 THD 8MM T-SLOT SS (070-1136)
Figure 3 Hardware
2.3.2 Install the Cover on Transpector SPS Housing
1
Place the cover on both sides of the system. Place T-Nut M6 THD 8MM
T-SLOT SS (070-1136) in the trench on both sides of the foreline block. Use
screw M6 x 10mm LG SOC HD CAP (144-111) to attach cover to each T-Nut in
the Transpector SPS foreline block.
Figure 3 Install cover
2
Connect covers together by using screw 10-32 x 0.50 (070-0242), washer #10
flat (090-019) and washer #10 split lock (090-045) as shown below. All cables
should be covered by the cover plate.
070-1136
090-019
070-0242
090-045
144-111
144-111
070-1136
Foreline Block
Cover
