10 – 13
Transpector SPS Operating Manual
Figure 10-18 Editing special bins not allowed
Removing Masses
Click
Remove
to remove an individual mass. (See
.)
Click
Remove All
to remove all of the masses. (See
.)
Figure 10-19 Remove
Figure 10-20 Remove All
10.6.1.2.2 Adding Masses
FabGuard Explorer allows masses to be added to the mass list for the sensor.
Dwell Time for New Bins
When collecting data with
Bin Independent
dwell times, the
Dwell Time for New
Bins
can be set to any value.
NOTE:
The dwell time for each mass can be changed by editing the mass.
This new dwell time will be used for all newly created masses.
Figure 10-21 Dwell time for new bins
