Inex IOIO-BOT, Manual

Page: 37 / 56

IOIO-BOT : Android Robotics 

37
(4.3.15) Connect the motor cables as follows :
Back right motor connect with M1 output - Red pole is outside and black pole is inside.
Front right motor connect with M2 output - Red pole is outside and black pole is inside.
Back left motor connect with M5 output - Red pole is outside and black pole is inside.
Front left motor connect with M6 output - Red pole is outside and black pole is inside.
Finally, plug the IOIO-Q board on the IOIO-RAB. Now IOIO-BOT is finished and ready
for working with Android device !
Right side motors
Left side motors