Inex IOIO-BOT, Manual

Page: 24 / 56

24

 IOIO-BOT : Android Robotics
3.1 IOIO-RAB technical features

Socket for installation both IOIO and IOIO-Q. The IOIO-Q is recommended for
IOIO-BOT

8 of Analog input connector in 3-pin of JST 2.00mm. type. The AN0 to AN5 input
support 0 to +3.3V input. AN6 and AN7 is used for analog sensor that re5V supply
but give only 0 to +3.3V output voltage maximum. For example, the distance sensor GP2D120/
GP2Y0A41 or GP2Y0A21.

18 of Digital input output port (I/O-pin31 to 48) in IDC 2.54mm. male and female
connector type. Support AWG#22 wires and/or also IDC1MF wires
 I
2
C bus connector with +3.3V supply voltage

Piezo speaker is connected with I/O-pin27 of IOIO-Q
Left orientation photo
Left orientation photo