Inex IOIO-BOT, Manual

Page: 34 / 56

34

 IOIO-BOT : Android Robotics
(4.3.9) Insert the motor cables through the large hole beside the battery holder to the top of
chasis. Fix the 3x32mm. standoff at the center groove following the picture below by using 3x6
mm screws. No need to tighten the screws because may move it later.
(4.3.8) Insert the spike wheel with DC motor gearbox shaft. Tighten with 2mm. tapping screw.
Do all 4 wheels.
(4.3.10) Attach the metal angle bracket 2x2 with bracket 2x1 by using 3x6mm. screw and
3mm. locknut. No need to tighten because need to sway back to back.
Attach both bracket with screw
and locknut