Inex IOIO-BOT, Manual

Page: 25 / 56

IOIO-BOT : Android Robotics 

25
 +5V output connector and +3.3V used from IOIO-Q board

4 of Servo motor connectors with +6V servo motor regulator circuit. They are
connected with I/O-pin45 to 48 of IOIO-Q
 6 of DC motor output by using 3 of mini-TB6612 boards with motor indicators.
Support DC motor 4.5 to 9V 1A each.
 Low battery monitor circuit with indicator

Supply v6.5 to +12V. On-board +6V regulator circuit for IOIO-Q board and
Servo motors

There are 2 types of battery connector.
1. Terminal block : suitable for connecting with battery holder wire
2. DEAN connector : suitable for Litium Polymer (Li-PO) battery. 2 cells of Li-PO
(+7.4V) 1000mA or higher current is recommended.
 Dimension 3 x 4 Inches
Right orientation photo