INCOTEX 500F, Quick Start Manual

Page: 12 / 57

12 QUICK START GUIDE INCOTEX 500F
2.2.8. Changing the VAT rates
Start the operation by pressing . The first VAT group is displayed: 1.X.XX. Use keys and for
cyclic going through the VAT rates.
When a VAT rate number is reached and displayed, enter the new value pressing the digit keys. To
confirm press
.
After entering all the new rates, press to finish the operation. The new VAT rates are printed and
recorded in the FM (if the EFD operates in fiscal mode). A message about the number of tax changes
left is also printed.
2.2.9. Daily reports
To print a daily Z report press key .
To print a daily X report press “200 ”.
2.2.10. Fiscal memory reports
Generally there are two types of FM reports – FM reports by record numbers (detailed and short
reports) and FM reports by dates (detailed and short reports).
Note: Pressing the key cancels currently printed FM report. A corresponding message for a canceled
report is printed.
•
FM reports by record numbers
This kind of report is specified for detailed report- '2 ' or a short one '12 '. The prompting
message ' n_bGn' is displayed. Enter the number of a selected initial record (up to 4 digits) and press
. The prompting message 'n_End.' is displayed. Enter the number of a selected final record (up to 4
digits) and press .
If the number of the initial record is not entered in the above-described sequence, the default initial
number is 1. If the number of the final record is not entered, the default number is the one of the latest
FM record.
It is admissible that the initial and the final numbers are the same, but if the final number is less than
the initial one, a corresponding error message is displayed (Err 25).